Skimmer + niche seals
Fitting and penetration repairs
Most pool leaks are not dramatic shell failures; they are small breaches where something passes through the shell. The joint where the skimmer box meets concrete, the threaded seat behind a return eyeball, the conduit and cord seal of a light niche, hydrostatic valve seats in the main drain: each is a purpose-made component with a purpose-made repair, and dye testing points straight at the guilty one.
Scope
What this covers
Skimmer box throat and body resealing or full replacement where split
Return and jet fitting reseating with correct sealants for the finish
Light niche, conduit and cable gland sealing with power isolated
Hydrostatic valve inspection and replacement in the main drain sump
Pressure-side verification after repair to confirm the loss has stopped
Timing
When it's needed
Indicated when detection shows loss concentrated at a penetration: commonly after ground settlement stresses the skimmer joint, after a liner or finish replacement disturbs seats, or in older pools whose original fittings have simply reached end of life.
Never fully drain a pool without a groundwater and hydrostatic assessment, shells can lift out of the ground under external water pressure. Isolate power at the switchboard before anyone touches a pool light or its niche, and keep children away from partially drained pools and open excavations during repairs.
Quote variables
What shapes the scope
Which fitting is implicated and whether parts for it remain available
Water level drop needed to access the repair dry, if any
Condition of surrounding finish once the fitting is exposed
Electrical isolation and testing requirements around light niches
Pool repairs cross several licensed trades in NSW: plumbing work on pool pipework requires a licensed plumber, electrical work at lights and equipment requires a licensed electrician, and structural or building work above prescribed values requires an appropriately licensed contractor under NSW Fair Trading rules. Ask which licence covers each part of your quote and verify it before work begins.
Detection and repair services
Start your quote
Send through the job details and we'll connect you with a licensed provider who can quote this work.
If this is an emergency or anyone is at immediate risk, contact the relevant emergency service or your network or utility operator directly instead of using this form.